ADA Compliant Accessible Showers with a 30 Year Warranty

Freedom Wheelchair Accessible ADA Roll in Showers have a 60” x 36” inside dimension to comply with ADA requirements. One-piece ADA shower stalls are specially designed for new construction projects. Handicapped showers have a 7/8” reinforced beveled threshold, and a pre-leveled shower base, making installation simple and quick. Install with 3/8” finished flooring to meet the threshold requirement for ADA.

Fiberglass wheelchair accessible showers have a diamond accented tile look and are finished with a durable, easy-to-clean applied acrylic. The walls are fully reinforced to provide structural strength for added accessories. Order with a factory installed folding shower seat and grab bars to meet ADAAG guidelines for an ADA compliant roll in shower.

A great choice for completing commercial projects, Freedom ADA wheelchair showers are easy to install, simplifying your construction project. All Freedom Showers come with a 30 year manufacturer's warranty.

NOTE:

For smaller quantities reference model number APFQ6437BF875R

For large projects (truckloads) reference model number APF6437BF875R

Freedom ADA Showers:

• Outside Dimensions: 63”w x 38 ½”d x 80 7/8”h
• ADA compliant inside dimension 60” x 36”
• 1-piece for new construction
• 7/8” barrier free beveled threshold
• Handed by the RIGHT seat side
• Self-supporting and pre-leveled shower base eliminates mud setting
• 3 molded soap ledges
• Tile pattern with diamond accents
• Easy to clean applied acrylic finish
• Textured slip-resistant floor
• Full wall reinforcement
• Made in America
• 30 Year Manufacturer’s Limited Warranty

Code Compliance:

• ADA Accessibility Guidelines for Buildings and Facilities
• ANSI A117.1 Accessible and Useable Buildings and Facilities
• IPC International Plumbing Code
• UPC Uniform Plumbing Code
• ANSI Z124.2 Standards for Plastic Showers
• Complies With CSA Standards
• For Texas or North Carolina order APFQ6337BF875
• Call for MAS compliance or other requirements
• **For California see NOTE below

Available Accessories:

• Folding Shower Seat (factory installed)
• Grab Bars (factory installed)
• Shower Rod (factory installed)
• Weighted Curtain
• Pressure Balance Mixing Valve and Hand-held Shower and Slide Bar (factory mounted)
• Caulkless Drain
• Recessed soap dish (factory installed)
• Collapsible Water Retainer

**Please note for CALIFORNIA: This ADA compliant roll-in shower does not meet the requirements for the slope of a shower floor in California Building Code Chapter 11A (4% or less in all directions) or Chapter 11B (2% or less in all directions).  Please confirm that this shower does not need to meet the requirements in Chapter 11A or 11B of the California Building Code before purchasing, as we cannot accept returns. See our trench/linear drain unit to meet the slope requirements.

Click here for California Prop 65 Warning