Freedom Wheelchair Accessible ADA Roll in Showers have a 60” x 30” inside dimension to comply with ADA requirements. One-piece ADA roll in showers are perfectly designed for new construction projects.

These handicapped accessible wheelchair showers have a 7/8” reinforced beveled threshold, and a pre-leveled shower base, making installation simple and quick. Install with 3/8” finished flooring to meet the threshold requirement for ADA. Fiberglass showers have a diamond accented tile look, and are finished with a durable, easy-to-clean applied acrylic.

Easy to Install, Clean, and Enjoy - That's a Freedom Shower

Full wall reinforcement provides sturdiness and strength for added installed accessories. Order with a factory installed folding shower seat and grab bars to meet ADAAG guidelines for an ADA compliant roll in shower. A great choice for completing commercial projects, Freedom Showers are easy to install and simplify your construction project. All Freedom ADA shower units come with a 30 year manufacturer's warranty.

ADA Roll in Shower Features:

• Outside Dimensions: 63”w x 34”d x 78.875”h
• ADA compliant inside dimension 60”x 30”
• 1-piece for new construction
• 7/8” barrier free beveled threshold
• Handed by the Right Seat side
• Self-supporting and pre-leveled shower base eliminates mud setting
• 3 molded soap ledges
• Tile pattern with diamond accents
• Easy-to-clean applied acrylic finish
• Textured slip-resistant floor
• Fully backed walls
• Made in America
• 30 Year Manufacturer’s Limited Warranty

Code Compliance:

• ADA Accessibility Guidelines for Buildings and Facilities
• ANSI A117.1 Accessible and Useable Buildings and Facilities
• IPC International Plumbing Code
• UPC Uniform Plumbing Code
• ANSI Z124.2 Standards for Plastic Showers
• Complies With CSA Standards
• For Texas and NC order APFQ6334BF75
• Call for MAS compliance or other requirements
• **For California, see NOTE below

Available Accessories:

• Folding Shower Seat (factory installed)
• Grab Bars (factory installed)
• Shower Rod (factory installed)
• Weighted Curtain
• Pressure Balance Mixing Valve and Hand-held Shower and Slide Bar (factory mounted)
• Caulkless Drain
• Recessed soap dish (factory installed)
• Collapsible Water Retainer

**Please note for CALIFORNIA: This ADA compliant roll-in shower does not meet the requirements for the slope of a shower floor in California Building Code Chapter 11A (4% or less in all directions) or Chapter 11B (2% or less in all directions).  Please confirm that this shower does not need to meet the requirements in Chapter 11A or 11B of the California Building Code before purchasing, as we cannot accept returns. See our trench/linear drain unit to meet the slope requirements.

Click here for California Prop 65 Warning